Products

DESCRIPTION

Basic Info.

Model NO.	CN80PAL
Degree of Automation	Semi-automatic
Screwdriver Startup Mode	Under pressure
Condition	New
Customized	Customized
Power Source	Pneumatic
Nails Head	6.0mm-8.0mm
OEM Service	Available
Nail Shank Type	Smooth, Screw and Ring Shank
Business Type	Manufacturer and Trading Company
Operating Pressure	70-120psi(5-8.5kgs/Cm2)
Nail Shank	2.5mm-3.3mm
Nail Length	50mm-83mm
Load Capacity	30000PCS Nails
Transport Package	as Customer Requirement.
Specification	CE SGS
Trademark	KYA
Origin	China
HS Code	84671900
Production Capacity	1000 Sets Per Month

Product Description

Product Overview:

CN80PAL Pneumatic Coil Nailer For Automated Pallet Machine

The CN80PAL Coil Nailer is built for high speed nailing operations and is designed for those high speed production lines where automated machine mounted nailers are required.

Can be fitted to any automated timberframe manchines or automated pallet making machines..

Automatic remote control trigger valve.

3/8" Air inlet.

Drives 3000 nails per coil.

Special nose design for fast cycle.

Tool Specifications:

Model:	CN80PAL Pneumatic Coil Nailer For Automated Pallet Machine
Air Tool Type:	Air Nailer
Net Tool Weight:	3.02kgs(6.66lbs)
Body Material:	Aluminum Body
Operate Pressure:	70-120psi(5-8.3bar)
Load Capacity:	3000 Nails
Fasteners Type:	15 Degree Jumbo coil nails
Fasteners Head Diameter:	0.236"(6.0mm)-0.315"(8.0mm)
Fasteners Shank Diameter:	0.099"(2.5mm)-0.131"(3.3mm)
Fasteners Length:	2"(50mm)-3-1/4"(83mm)
Fasteners Shank Type:	Smooth,Screw,Ring

Nail Specifications:

15 Degree Jumbo coil nails

Fasteners Head Diameter:0.236"(6.0mm)-0.315"(8.0mm)

Fasteners Shank Diameter:0.099"(2.5mm)-0.131"(3.3mm)

Fasteners Length:2"(50mm)-3-1/4"(83mm)

Fasteners Shank Type:Smooth,Screw,Ring

Packaging & Delivery:

Packaging Details:	double corrugate paper box 61*38*38 cm / 4 pcs blow mold case carton box
Delivery Detail:	10~30 days

Features: Most powerful tool good for countersink nails into Hard Oak pallet.

Durable aluminum Frame & Cylinder Cap.

Downwards directional exhause.

Built-in silencer to reduce noise level.

Comfortable rubber grip.

Applications:Working on automated pallet machine.

Assembly pallets, drums, export wooden boxes.

Company Information:
Service and Repars:

No.	Symptom		Problems	Solutions
1.1	Air Leak	Air leak in the cylinder cap when tools don't work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2		Air leak in Trigger area when tools don't work	1.Damaged o-ring in trigger valve	Check and replace o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
1.3		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
1.4		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
1.5		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit) or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3	Work weakly and sluggishly		1. Worn or damaged piston o-ring	Check and replace piston o-ring
			2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings	Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings
			3.Dirt in the nozzle	Check and clean the nozzle
4	Tool jams frequently		1.Damaged or Worn driver (piston unit)	Check and replace driver (piston unit)
			2.Damaged or Worn driver guide (nose)	Check and replace driver guide (nose)
			3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big	Check and replace driver guide cover
5	Nail can not be shot		1. Driver (piston unit) can't return to the correct position.	Refer to no. 1 Symptom
			2.Driver guide(nose) can not match magazine well	Check and correct the position between driver guide(nose) and magazine
			3.Worn or damaged nail pusher compression spring	Check and replace nail pusher compression spring

FAQ:
1
Q:Do you have your own production factory? A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
2
Q: Can you send us samples? A: We are pleased to send you the sample to test the quality and market. 3
Q: About your products, could you do it OEM? A: Yes, OEM service is available. 4
Q: Do you also provide spare parts of pneumatic tools? A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts. 5
Q: For the product, could you spray other color of painting? A: Yes, color can be customized. 6
Q: What's the delivery time? A: It usually takes about 20-30 working days to produce one order. 7
Q: How is the payment terms? A: Normally T/T 30% in advance and T/T 70% before shipment. 8
Q: Can I mix different models in one container? A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ. 9
Q: How does your factory do regarding quality control? A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery. 10
Q: Do you have quality certification? A: Yes, we have CE, SGS,ISO, ect.

Contact Us: