Industrial Professional Heavy Duty Air Straight Flux Hammer
Product Application This air straight hammer is used to chamfering before welding,remove weld flux after welding.Also ca
Send your inquiryDESCRIPTION
Basic Info.
Model NO. | NV-1089 |
Customized | Non-Customized |
Impacting Frequency | 55Hz |
Impacting Energy | 2j |
Operating Pressure | 4-5 Bar 58-72.5 Psi |
Air Consumption | <=6L/S |
Inside Dia.of Hose Connector | 8mm |
Max. Dia. of Cylinderl | 20mm |
Air Hammer | Industrial Professional Heavy Duty Air Straight FL |
Weight | 0.86kg |
Transport Package | Carton |
Trademark | NOVIA TOOLS or Neutral or OEM |
Origin | Zhejiang |
Production Capacity | 50000pieces/Year |
Product Description
Product Application
This air straight hammer is used to chamfering before welding,remove weld flux after welding.Also can be used for cutting application on steel structure and casting pieces.Industrial Professional Heavy Duty Air Straight Flux Hammer | |||
Item No | NV-1089 | ||
Operating Pressure | 4-5 Bar 58-72.5 PSI | ||
Air Consumption | <=6L/S | ||
Impacting frequency: | 55HZ | ||
Impacting energy | 2J | ||
Max. dia. of cylinderl | 20mm | ||
Inside dia.of hose connector | 8mm | ||
Air inlet | 1/2" | ||
Net Weight: | 0.86KG |
Main Features
1) Simple design,High efficincy.2) Special locking system,once it get loose during the working,please fasten it properly before continue to use it.3) When used for long time,please check if there are some worn out on the tip of chisel,if yes,please grinding it by grinder before continue to use it4) Please only actuate the tools when the chisel is mounted onto the tool and point to the workpiece.Then press the trigger a bit to make the tool moving slowly.Only pressure the trigger fully and moving full speed when the chisel cut into the workpiece.5) Actuated the tool without chisel is forbidden,that will damage the inner parts.